Procedure in Industrial laundry factory


Procedure in Industrial laundry factory
(the cleaning operation in accordance with the one-way)



You can reference ground layout layout of industrial cleaning equipment are as follows:



STEP 1: COLLECT - CLASSIFICATION 
Collected dirt should put into sorting laundry, remark of distinction and materials linen for each batch of laundry washing machines accordingly. 
Colors, materials as thin as silk tunic suit, ... separate laundry. Used dry cleaning machine dedicated to cleaning for guests. 
 
STEP 2: SPOTING
 
Brought into the basin to handle the preliminary cleaning and removing stubborn stains point by point cleaners and specialty chemicals. 
STEP 3: WASHING 
Putting fabric classified in accordance washer extractor capacity washing machine and select appropriate mode. Washer extractor (wet cleaning) industrial cleaning capacity is 15kg - 200kg. Dry cleaning machine with a capacity of 10 - 35 kg 
STEP 4: DRYER 
After wringing laundry done, move the map to the dryer. Depending on the speed of milking and washer extractor G forces of industry that the amount of water remaining more or less to adjust programs appropriate drying time and temperature chart should help dry drying.

STEP 5: COMPLETION 
Classification map suitable for use  roller ironer / ironing board or flatwork, finish form machine

After completing the program dryers, drying, removal van across the board parts used bulldozers swept aka bulldozed. Often tablecloth, bed-sheets, pillow cases will use a flat iron to iron.

For suits, trousers, shirts, ... will be used bulldozers forced to board; If the map suits, tunic, ... will form steam blowers used to straighten linens. For towels, washcloths, it does not need ironing as needed softness of the fabric. 

STEP 6: PACKAGE - EXPRESS LAUNDRY
This step is the stage of sorting and packing of finished cloth or hanging hook if individual items awaiting delivery of the furniture. 




SOME BASIC REQUIREMENTS WHEN PLANNING CONSTRUCTION, ARRANGEMENT OF WASHING 

Laundry room minimum area of 0.25 x = kg of laundry in an 8-hour workday 
The minimum ceiling height of 3.6 m 
Minimum brightness 300lux 
Location arrange laundry equipment to go under the laundry process from input to output




+Industrial washing machines and dryers should be placed along the wall 
+The distance from the back of the washing machine, dryer, flat iron machine, ... to the wall large enough to facilitate maintenance work, maintenance 
+Industrial washer extractor must be placed on a concrete floor with minimum thickness 10cm 
+The distance between the two machines installed according to the catalog of the manufacturer 
+Ventilated area to obtain fresh air dryers, flat iron = 5 times the area of ​​evaporation

VIDEO  SMALL WASHING CAPACITY LAUNDRY SHOP FOR YOUR REFERENCES




Click để gọi 0437938373